Different Home Automation Systems


Home automation is not a new concept as the smartphones keep people aware of new technologies. There are various types of home automation systems that one should know before going for smart home. The automation system either involves wires or it is wireless or works through the power line or touchscreen. People can select the right smart home automation in Dubai depending on their budget, requirements, and nature of home or any other property, like office, factory, hospital, shopping mall, and so on.


Wire-Free Home Automation System


This system does not involve any wires, unlike the wired automation. A wireless home automation uses different technologies, including the Bluetooth, Wi-Fi, GSM, IR, or Zigbee that help perform a function remotely. Like, an automation system with GSM controls home appliances and equipment through an SMS to a GSM device. The system can help control the lights, appliances, equipment like air-conditions, and heaters, etc. It also involves TV and music system of home theater or bathrooms. All security devices also come up with a wireless home automation system.

Wired Smart Home Automation

This automation system involves cables that connect various appliances to the main controller. The technician connects the equipment with the actuators, communicating with the controller. The engineer centralizes all operations with a computer that links with the main controller consistently.

Smart Home Automation with Power Line

This is the most inexpensive of all types of home automation systems. This system does not use wires for information transfer; instead, it involves home power lines for data transfer. But, this is a complex system compared to wireless and wired automation system because it requires extra devices and converter circuits. You can apply the power line automation to your home if your budget is low and you can understand the complex function.

Touch Screen Automation System

This is also a low-cost home automation system that involves a microcontroller connected to the light loads. The user can control an operation with a touchscreen by sending a command. The touch screen transfers the command signals to the microcontroller that sends these commands to the encoder. The encoder circuit further transfers the information to an RF transmitter after converting it into a binary format. Then the information goes to the receiver that decodes and sends the data to the microcontroller. The microcontroller sends information to an isolator driven by TRIACs switches. Try this system if you are looking for a touchscreen home automated system that is economical.